desktop

Logo společnosti J 4 s.r.o.

“We build ovens for mastersof their craft”

STIR – infrared radiation

Products

Banne EU

VELETRHY S PODPOROU EU

Název projektu: Podpora společnosti J4 s.r.o. na zahraničních trzích

Registrační číslo projektu: CZ.01.2.111/0.0/0.0/16_047/0008908

Popis projektu: Projekt je realizován v rámci Operačního programu Podnikání a inovace pro konkurenceschopnost. Předmětem předkládaného projektu je zvýšení konkurenceschopnosti společnosti J4 s.r.o. na zahraničních trzích, a to pomocí podpory účasti firmy na 7 mezinárodních veletrzích v letech 2017 až 2019. Účast na vybraných veletrzích přispěje společnosti k novým zakázkám, zvýšení obratů a také k celkovému růstu společnosti. Projekt je spolufinancován Evropskou unií.


STIR is a patented ceramic layer that makes the baking process more effective.
01 2f15f566a5515336e7d7733a82a8b14902 24dd9073ed55858f0a67b80892ddc1a3

STIR – infrared radiation

This special ceramic layer put on the upper heating radiator provides significantly faster heating of the baked products crumb than in comparison with common convection baking methods. With use of STIR technology, it results in lower loss of dough during baking, in the increase of the size and quality of the baked product, by that the product freshness is prolonged and that the baking time is shortened.

Differences in baking of convection oven and oven equipped with STIR layer

Standard convection oven

Convection heat hands over the heated air with steam into the outer surface of the product. Due to the low heat conductivity of the dough the heat penetrates towards to the core of the dough piece rather slowly. As a result the core is heated up to the temperature necessary for forming and stabilizing crumb in around 11 -15 minutes (that holds true for 400 g dough piece). During this period, the product’s surface is intensely heated and this creates a thick crust, whose quality can only be affected by steaming.

Oven equipped with ceramic layer STIR

In oven with ceramic STIR layer the heating is performed by convection heat and by infrared radiation from layer STIR. Infrared radiation penetrates to the mould’s core quickly, where it reaches temperatures necessary for the formation of a quality crumb in about 4 to 5 minutes (that holds true for 400 g dough piece). As a result, the crust on the surface of the product is created rather more slowly and is thinner.

Ceramic layer STIR is applied on the upper heating radiator. Hot radiator heats up the ceramic layer STIR and then this layer generates infrared radiation. Intensity of the infrared radiation is proportional to the temperature of the upper radiator. The hotter the radiator is, the stronger the infrared radiation is and the stronger its influence for baked products is.

This optional accessory is applicable to all types and sizes of cyclothermic and electrical baking band ovens of the company J4 s.r.o. In the ovens with electrical heating the ceramic layer is spread directly on the heating element, with which the maximum effectivity of STIR technology is secured. This technology with ceramic layer STIR is not applicable to convection ovens or ovens with direct electric heating as a consequence of the nature of heating.

Photogallery
01 2f15f566a5515336e7d7733a82a8b149
02 24dd9073ed55858f0a67b80892ddc1a3

J4 s.r.o.

Průmyslová 96

Předměřice nad Labem

CZ-503 02 Česká republika

 

VAT ID Number: 60935731

 

Registered at Municipal Court

in Hradec Králové, section C, insert 6207

 

Telephone: +420 495 581 139

Fax: +420 495 581 321

E-mail: j4@j4.cz

SERVICE:

Ing. Michal Verner

Head of Service

 

verner@j4.cz

×

TOP